Netgear FS728TS - ProSAFE 24 Port 10/100 Stackable Smart Switch with 4 Gigabit Ports インストールガイド

4-36

Configuring Switching Settings

The Multicast Forward All screen contains the following information:

•

VLAN ID – Enter the VLAN ID.

•

VLAN Name – Displays the user defined VLAN name.

•

Interface – Displays the interface for which the Multicast settings are displayed.

•

Interface Status – Select the interface status. The possible field values are:

–

Static – The interface is added to the Multicast forward group statically. 

–

Forbidden – The interface is forbidden to join the mulitcast group.

–

Excluded – The interface is not included in the Multicast group.

2. Select the VLAN ID from the list in the provided fields.

3. Select the port or LAG interface entry in the Multicast Group table.

4. Select the Interface Status from the list in the provided field in the first row. Note that you 

may not specify Dynamic.

5. Click APPLY to update the device.

Packets addressed to destinations stored in either the Static or Dynamic databases are immediately 
forwarded to the port. The Dynamic MAC Address Table can be sorted by interface, VLAN, or 
MAC Address. MAC addresses are dynamically learned from packets from sources that arrive at 
the device as apposed to Static addresses that are configured manually.

An address becomes associated with a port by learning the port from the frame’s source address 
but if a frame that is addressed to a destination MAC address is not associated with a port, that 
frame is flooded to all relevant VLAN ports. To prevent the bridging table from overflowing, a 
dynamic MAC address, from which no traffic arrives for a set period, is erased.

The Address Table menu contains the following options:

•

•