Netgear FS728TS - ProSAFE 24 Port 10/100 Stackable Smart Switch with 4 Gigabit Ports インストールガイド
FS700TS Smart Switch Software Administration Manual
Monitoring the Switch
7-5
v1.0, September 2007
The Memory Log screen contains the following fields:
•
Log Index – Displays the log number.
•
Log Time – Displays the time at which the log was generated.
•
Severity – Displays the log severity and urgency level.
The following are the available log
severity levels:
–
Emergency – The highest warning level. If the device is down or not functioning
properly, an emergency log message is saved to the specified logging location.
properly, an emergency log message is saved to the specified logging location.
–
Alert – The second highest warning level. An alert log is saved, if there is a serious
device malfunction; for example, all device features are down.
device malfunction; for example, all device features are down.
–
Critical – The third highest warning level. A critical log is saved if a critical device
malfunction occurs; for example, two device ports are not functioning, while the rest
of the device ports remain functional.
malfunction occurs; for example, two device ports are not functioning, while the rest
of the device ports remain functional.
–
Error – A device error has occurred; for example, if a single port is offline.
–
Warning – The lowest level of a device warning. The device is functioning, but an
operational problem has occurred.
operational problem has occurred.
–
Notice – Provides device information.
–
Informational – Provides device information.
–
Debug – Provides debugging messages.
•
Description – Displays the log message text.
2. Click REFRESH or CLEAR LOGS to refresh or reset the Memory Logs screen.
Flash Log
The Flash Log screen contains information about log entries saved to the log file in Flash,
including the time the log was generated, the log severity, and a description of the log message.
The message log is available after reboot.
including the time the log was generated, the log severity, and a description of the log message.
The message log is available after reboot.