Netgear FS728TS - ProSAFE 24 Port 10/100 Stackable Smart Switch with 4 Gigabit Ports インストールガイド
FS700TS Smart Switch Software Administration Manual
Configuring Switching Settings
4-21
v1.0, September 2007
To configure Port PVID parameters:
1. Click Switching > VLAN > Advanced > Port PVID Configuration. The Port PVID
Configuration screen displays:
The Port PVID Configuration screen contains the following fields:
•
Interface – Displays the interface id (port number or LAG number) to which the PVID tag
is assigned.
is assigned.
•
PVID – Enter the PVID value. The possible field range is 1-4093.
2. Select an interface.
3. Enter the PVID in the provided field in the first row.
4. Click APPLY to update the device.
STP
Spanning Tree Protocol (STP) provides tree topography for any arrangement of bridges. STP also
provides a single path between end stations on a network, eliminating loops. Loops occur when
alternate routes exist between hosts. Loops in an extended network can cause bridges to forward
traffic indefinitely, resulting in increased traffic and reducing network efficiency.
provides a single path between end stations on a network, eliminating loops. Loops occur when
alternate routes exist between hosts. Loops in an extended network can cause bridges to forward
traffic indefinitely, resulting in increased traffic and reducing network efficiency.
The STP menu contains the following options:
•
•
Figure 4-15