Xerox CopyCentre 265/275 ユーザーガイド
Quick Reference Guide
Page 12-3
T
roubleshooting
Fault Clearance
If you are unable to clear the fault, refer to the next section to contact your local
Xerox Welcome and Support Centre for assistance.
Xerox Welcome and Support Centre for assistance.
NOTE: For additional Troubleshooting information please refer to the Training and
Information CD (CD2) or the System Administration CD (CD1).
Information CD (CD2) or the System Administration CD (CD1).
1
When a fault occurs, a fault screen
displays which provides recovery
instructions.
displays which provides recovery
instructions.
¾
Follow these instructions to clear
the fault.
the fault.
NOTE: Any printed sheets removed
will automatically be reprinted once
the paper jam is cleared.
will automatically be reprinted once
the paper jam is cleared.
2
Paper jams
¾
The fault screen will indicate the
location of the jam.
location of the jam.
¾
Use the green handles and knobs
indicated in the instructions displayed
to remove the jammed paper.
indicated in the instructions displayed
to remove the jammed paper.
¾
Ensure that all jam clearance handles
and levers are returned to their
correct positions. The red flashes
behind the jam clearance handles
and levers should not be visible.
and levers are returned to their
correct positions. The red flashes
behind the jam clearance handles
and levers should not be visible.
NOTE: Jam Clearance areas vary
depending on your machine model and
configuration.
depending on your machine model and
configuration.
3
Document jams
¾
Remove all the documents from the
document handler and document
glass as instructed.
document handler and document
glass as instructed.
¾
Re-order the documents as at the
start of the job and reload. The
documents will be recycled
automatically to recover the job.
start of the job and reload. The
documents will be recycled
automatically to recover the job.