Xerox CopyCentre 265/275 ユーザーガイド

Page 4-4

 Quick Reference Guide 

Output is used to select the finishing requirements for the job. The options will 
depend on the finishing output device installed.

HINT: For an explanation of all the finishing devices available refer to “Finishing 
Devices” on page 2-13.

Select Collated for output stacked in sets to match the sequence of the originals.

Select Uncollated for output sorted into stacks of individual pages.

This option is available if your machine is equipped with a finisher and 2 Hole 
Punch, 4 Hole Punch or Swedish 4 Hole Punch. Each sheet is punched individually, 
so there is no limit to the number of sheets in the set. Additional Hole Punch kits can 
be purchased as an option. Only one Hole Punch kit can be fitted at one time.

NOTE: Some stapling options can be used in conjunction with Hole Punching.

 The Stapling options are as follows:

The output will not be stapled.

Use this option to add a single staple to your output.

Use this option to add 2 staples to your output. Staples can be added to the 
Left Edge or Right Edge of your output.
This option is not available on the Basic Office Finisher.