Honeywell Honeywell Security | Protect What Matters Most ユーザーガイド
– 30 –
Security Codes & Authority Levels
Security Codes & Authority Levels
Security Codes & Authority Levels
Security Codes & Authority Levels
About Security Codes
About Security Codes
About Security Codes
About Security Codes
Your installer assigned a master code that is used to perform all system functions.
In addition, you can assign up to 15 different security codes for use by other users.
• Only the System Master can assign security codes to users.
• Users are identified by 2-digit user numbers (03-17 [users 01 and 02 are reserved]).
• In addition to a security code, each user is assigned various system attributes.
• Security codes can be used interchangeably when performing system functions (a
In addition, you can assign up to 15 different security codes for use by other users.
• Only the System Master can assign security codes to users.
• Users are identified by 2-digit user numbers (03-17 [users 01 and 02 are reserved]).
• In addition to a security code, each user is assigned various system attributes.
• Security codes can be used interchangeably when performing system functions (a
system armed with one user's code can be disarmed by another user's code), with
the exception of the Guest code and Arm Only code described below.
the exception of the Guest code and Arm Only code described below.
• Security code programming involves these steps:
1. Choose a user number and assign a 4-digit security code.
2. Assign an authority level to that user.
3. Assign other attributes as necessary (see attributes on the next page).
1. Choose a user number and assign a 4-digit security code.
2. Assign an authority level to that user.
3. Assign other attributes as necessary (see attributes on the next page).
NOTE: The factory settings are designed to meet most normal user situations.
Therefore, the only step you usually need to do when adding users is assign a user
number and a security code.
Therefore, the only step you usually need to do when adding users is assign a user
number and a security code.
Authority Level Definitions
Authority Level Definitions
Authority Level Definitions
Authority Level Definitions
Authority levels define the system functions a particular user can/cannot perform.
Level Title
Explanation
N/A
System Master Reserved for user 02; Can perform all system functions and assign
codes; can change its own code as described on the following page.
The default System Master code is 1234.
The default System Master code is 1234.
0
Standard User Can only perform security functions. Cannot perform system
functions reserved for the master user.
1
Arm Only
Can only arm the system. Cannot disarm or do other functions.
2
Guest
Can arm the system, but cannot disarm the system unless the
system was armed with this code. This code is typically assigned to
someone (e.g., babysitter or cleaner) who has a need to arm/disarm
the system only at certain times. The user of this code should not use
the “Quick Arming” feature.
system was armed with this code. This code is typically assigned to
someone (e.g., babysitter or cleaner) who has a need to arm/disarm
the system only at certain times. The user of this code should not use
the “Quick Arming” feature.
3
Duress Code
Intended for use when you are forced to disarm or arm the system
under threat. When used, the system will act normally, but can
silently notify the Central Monitoring Station of your situation, if that
service has been provided.
under threat. When used, the system will act normally, but can
silently notify the Central Monitoring Station of your situation, if that
service has been provided.