Honeywell Honeywell Security | Protect What Matters Most ユーザーガイド
– 63 –
SYSTEM FUNCTIONS
Testing the System (to be conducted weekly)
Test Mode
The Test mode allows each protection point to be checked for proper operation. When the
Walk Test mode is active, the control sounds a single beep every 30 seconds as a reminder
that the system is in the Test mode.
Walk Test mode is active, the control sounds a single beep every 30 seconds as a reminder
that the system is in the Test mode.
NOTE: An alarm message will not be sent to your alarm monitoring company during these tests.
Entering Test Mode
Disarm the system and close all protected windows, doors, etc. The “READY” indicator
should be lit.
should be lit.
Testing the System
Arm Away
Ready To Arm
Arm Stay
Back
Delay
Settings
10:18 AM June 8, 2010
5000-100-007-V0
Tools
1. With the system in the disarmed state,
select the “Tools” icon from the second page
of the Home Screen. The system displays
the Keypad screen.
of the Home Screen. The system displays
the Keypad screen.
Ready To Arm
Program the system
Enter Code:
C a n c e l
5000-100-009-V0
2
3
1
5
6
4
0
8
9
7
C l e a r
2. Enter your 4-digit Master User Code. The
system displays the Master User
programming screen.
programming screen.
Slide Show
Date Time
Ready To Arm
Events
Back
Reminders
Test
Schedules
Devices
Users
5000-100-070-V0
3. Select the “Test” icon. The system displays
the Test screen.