Honeywell Wi-Fi 7-Day Programmable Thermostat (RTH6580WF) ユーザーガイド

Connecting to your Wi-Fi network

If your Wi-Fi network does not appear in the list on the Thermostat Wi-Fi Setup 

page:

•  Try performing a network rescan by pressing the Rescan button. This is helpful in 

areas with a lot of networks.

•  If you are connecting to a hidden network, then enter the network SSID in the 

textbox, select the encryption type from the drop down menu, and click on the 
Add button. This manually adds the network to the top of the list. Click on the new 
network in the list and enter the password if necessary. Click on Connect to join the 
network.

3  Make sure your thermostat is connected.

While the connection is in process, your thermostat 
will flash 

Wait for up to 3 minutes. When the 

connection is complete, the display will show 

Setup Connection Success. The Wi-Fi signal strength will 
appear in the top-right corner.
After about 60 seconds, the home screen will appear 
and 

Register at Total Connect will flash until registration 

is complete.

If you don’t see these messages, see page 10.
To register online for remote access to your thermostat 
continue on page 12.

If the thermostat displays 

Connection Failure or continues to display 

Wi-Fi Setup, confirm you correctly entered your home network password in 
step 2. If correct, refer to the FAQ at wifithermostat.com/support

M33875

M33876