Kenwood Electronics RV-7000 ユーザーズマニュアル
48
RV-7000/RV-6000/RA-5000
Sound ad
ju
st
men
t
08/7,&21752/
721(
%$66%2267
$&7,9((4
721(5$
08/7,&21752/
∞/5
ACTIVE EQ mode
ACTIVE EQ mode
The optimum acoustic field effect can be selected according to
the purpose of playback.
the purpose of playback.
1
Press [ACTIVE EQ].
Each press switches the mode as follows:
Display
Setting
"A-EQ MUSIC"
Effective when listening to music.
"A-EQ CINEMA"
Effective when watching a movie.
"A-EQ GAME"
Effective when playing a game.
"A-EQ OFF"
Active EQ function is off.
Bass Boost
Bass Boost
The Bass Boost can be adjusted when the input signal is a PCM or
analog signal and the listen mode of this unit is set to "STEREO",
and also ACTIVE EQ mode is set to "OFF".
analog signal and the listen mode of this unit is set to "STEREO",
and also ACTIVE EQ mode is set to "OFF".
1
Press [BASS BOOST].
Press the key once to select the maximum (+10) low
frequency emphasis setting.
frequency emphasis setting.
TONE will automatically be turned ON.
To cancel
Press [BASS BOOST] again.
Adjusting the Tone
Adjusting the Tone
The tone level can be adjusted when the input signal is a PCM or
analog signal and the listen mode of this unit is set to "STEREO",
and also ACTIVE EQ mode is set to "OFF".
analog signal and the listen mode of this unit is set to "STEREO",
and also ACTIVE EQ mode is set to "OFF".
1
Press [TONE].
2
Select whether or not the tone level is to be
adjusted.
Use [MULTI CONTROL
∞/5] to select "TONE ON" or "TONE
OFF".
[TONE]
Display
Setting
"TONE ON"
The tone level can be adjusted. Go to step 3 after setting.
"TONE OFF"
The tone level is not adjusted.
3
Adjust the level of "BASS" (low frequencies).
Use [MULTI CONTROL
∞/5] to adjust the level.
[TONE]
The level is adjusted from –10 to +10.
4
Adjust the level of "TREB" (high frequencies).
Use [MULTI CONTROL
∞/5] to adjust the level.
[TONE]
The level is adjusted from –10 to +10.
Adjusting the sound
B60-5827-08_00_En.indd 48
10.8.3 11:08:31 AM