Intel D845GVSR D845GVSRL ユーザーズマニュアル

製品コード
D845GVSRL
ページ / 110
Product Description 
 33 
1.11.2  RJ-45 LAN Connector with Integrated LEDs 
Two LEDs are built into the RJ-45 LAN connector.  Table 10 describes the LED states when the 
Desktop Board is powered up and the LAN subsystem is operating. 
Table 10.  LAN Connector LED States 
LED Color 
LED State 
Condition 
Off 
10 Mbit/sec data rate is selected. 
Green  
On 
100 Mbit/sec data rate is selected. 
Off 
LAN link is not established. 
On (steady state) 
LAN link is established. 
Yellow  
On (brighter and pulsing) 
The computer is communicating with another computer on  
the LAN. 
1.11.3  LAN Subsystem Software 
LAN software and drivers are available from Intel’s World Wide Web site. 
 
For information about  
Refer to 
Obtaining LAN software and drivers 
1.12  Hardware Management Subsystem (Optional) 
The hardware management features enable the boards to be compatible with the Wired for 
Management (WfM) specification.  The board has several hardware management features, 
including the following: 
•  Fan monitoring (through the I/O controller or the hardware monitoring and fan control ASIC) 
•  Thermal and voltage monitoring 
•  Chassis intrusion detection 
 
For information about  
Refer to 
The WfM specification 
1.12.1  Hardware Monitoring and Fan Control ASIC 
The features of the hardware monitoring and fan control ASIC include: 
•  Internal ambient temperature sensor 
•  Two remote thermal diode sensors for direct monitoring of processor temperature and ambient 
temperature sensing  
•  Power supply monitoring of five voltages (+5 V, +12 V, +3.3 VSB, +1.5 V, and +VCCP) to 
detect levels above or below acceptable values 
•  Thermally monitored closed-loop fan control, for all three fans, that can adjust the fan speed or 
switch the fans on or off as needed 
•  SMBus interface 
•  Fan monitoring for all three fan connectors