husky-liners 2450 ユーザーズマニュアル

2450.DOC

Rev: 0

01/31/01

CARE AND USE INSTRUCTIONS

     Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not completely

unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back of your vehicle

with a weight in each corner (a book works well). After about 15 minutes, your liner will remain flat. In colder

climates this “relaxing” may take longer; moving the liner to a heated area will accelerate the process.

     Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use

of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR ISUZU

RODEO/HONDA PASSPORT CARGO LINER

TO ACCESS THE FACTORY CARGO HOOK TIE
DOWN LOCATIONS IN YOUR CARGO LINER YOU
MUST FIRST MAKE A SLIT IN THE FOUR (4)
RAISED AREAS ON YOUR LINER (SHOWN HERE
DARKENED). THEN, PUSH THE HOOK RINGS UP
THROUGH THE LINER.