Apple B2867757 ユーザーズマニュアル

When You Have Problems Operating the Machine

9

The following chart gives explanations of common problems and messages.
If other messages appear, follow the instructions displayed.

❒ Check the contact address and Serial No. of Machine shown in the Service

Call message (L), and then contact your service representative. If the contact
address is not shown, contact your sales representative.

Nothing happens when 
the operation switch is 
turned on.

The main power switch 
is turned off.

Turn on the main power switch. 

Although the copier 
screen appears when the 
machine is turned on us-
ing the main power 
switch, it cannot be 
switched to another 
screen by pressing the 
{Scanner} key.

Functions other than the 
copier function are not 
yet ready. 

Wait a little longer.

The machine has just 
been turned on and the 
User Tools screen is dis-
played, but the User 
Tools menu has items 
missing.

Functions other than the 
copier function are not 
yet ready. Time required 
varies by function. Func-
tions appear in the User 
Tools menu when they 
become ready for use.

Wait a little longer.

The main power indica-
tor continues blinking 
and does not turn off 
when pressed.

This occurs in the follow-
ing cases:

• The machine is com-

municating with ex-
ternal equipment.

• The hard disk is active.

Check if the machine is communicating 
with a computer.

The display is off.

The machine is in Energy 
Saver mode.

Press the {Energy Saver} key to cancel 
Energy Saver mode.

The display is off.

The operation switch is 
turned off.

Turn on the operation switch.

The display is off.

The screen contrast knob is 
turned to the dark position.

Set the screen contrast knob to the light 
position to see the display panel properly. 
See “Control Panel”, About This Machine.

“

Please wait.

” ap-

pears.

This message appears 
when you turn on the op-
eration switch.

Wait for the machine to get ready.