Apple B2867757 ユーザーズマニュアル

When a Message Appears

53

Reference
“Turning On the Power”, About This Machine

This section explains likely causes of and possible solutions for the main error
messages displayed on the client computer when using the TWAIN driver.

❒ If a message not described here appears, act according to the message. For in-

formation about how to turn off the main power switch, see “Turning On the
Power”, About This Machine.

Exceeded max. 

data capaci-

ty.Check scanning 

resolution, then 

press Start key 

again.

The scanned data ex-
ceeded maximum data 
capacity.

Specify the scan size and resolution 
again. Note that it may not be possible to 
scan very large originals at a high reso-
lution. See “Relationship between Reso-
lution and Scan Size”, Scanner 
Reference.

Exceeded max. 

page capacity per 

file. Press 

[Send] to send 

the scanned data, 

or press [Cancel] 

to delete.

The number of scanned 
pages exceeded maxi-
mum page capacity.

Select whether to send the data so far.

Cannot display 

preview of this 

page.

The size of the image you 
want to preview is larger 
than A2 (C).

Images larger than A2 (C) cannot be previewed.

Specify A2 (C) or a smaller image, or 
scan again at A2 (C) or smaller.

Paper misfeed has 

occurred.

A paper misfeed has 
occurred.

Remove jammed originals, and place 
them again.

Check whether the originals are suitable 
to be scanned by the machine.

The scanning area 

does not match 

the original.

The specified area to be 
scanned differs from the 
actual scanned area of 
the original.

Check the location of the original.

The start posi-

tion of the scan-

ning area does 

not match the 

original.

The specified area to be 
scanned differs from the 
actual scanned area of 
the original.

Check the location of the original.