Hanna Instruments hi 95761 ユーザーズマニュアル

3

Please examine this product carefully. Make sure that the instrument is not damaged. If any
damage occured during shipment, please notify your Dealer.
Each HI 95761 Portable Meter is supplied complete with:

• Two Sample Cuvets and Caps
• 9V Battery
• Scissors
• Two CAL CHECK™ Cuvets (HI 95761-11) with Quality Certificate
• Tissue for wiping cuvets
• Instruction Manual and Quick Reference Guide
• Instrument Quality Certificate
• Rigid carrying case

Note:save all packing material until you are sure that the instrument works correctly. Any

defective item must be returned in its original packing.

18

REAGENT SETS
HI 95761-01

Reagents for 100 

Total Chlorine LR 

tests

HI 95761-03

Reagents for 300 

Total Chlorine LR 

tests

OTHER ACCESSORIES
HI 95761-11

CAL CHECK™ Standard Cuvets     (1 set)

HI 710009

Blue rubber boot

HI 710010

Orange rubber boot

HI 721310

9V battery (10 pcs)

HI 731318

Tissue for wiping cuvets (4 pcs)

HI 731331

Glass cuvets (4 pcs)

HI 731335

Caps for cuvets (4 pcs)

HI 93703-50

Cuvets cleaning solution (230 mL)

Battery replacement must only take place in a

non-hazardous area.
Simply slide off the battery cover on the back of
the meter. Detach the battery from the terminals
and attach a fresh 9V battery while paying attention

to the correct polarity. Insert the battery and replace
the cover.

9V

FACTORY CALIBRATION RESET
It is possible to restore factory calibration:
• Enter the calibration mode by holding CAL CHECK

for three seconds.

• Hold ZERO for 10 seconds. The display will

show for 2 seconds “F.CAL” and "761" appears.

The factory calibration is automatically restored
and the instrument is ready for measurement.