avolites pearl exper ttitan ユーザーズマニュアル

Copyright Avolites Limited 2010

10. Remote control - Page 107

PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00

10. Remote control

This chapter contains: Setting up the remote control; using the

remote control.
With the addition of an external

Wireless Access Point, the Pearl can be

remote controlled using Wi-Fi from an

iPod Touch or an iPhone. This can be

invaluable when rigging, testing and

focusing. You can also run playbacks

and reset fixtures from the remote.
The remote function operates from a

web page on the console which is

accessed using the web browser in the

iPod/iPhone.

10.1

Setting up the remote

This is a basic setup assuming that the

console is connected directly to an

access point. For more complicated networks, please consult your

network administrator. For information on setting up your Wireless

Access Point please refer to the documentation provided with it.

10.1.1 Network setup

You need to set up the network settings on the Wireless Access Point,

the iPod and the console so that they can communicate with each

other.

1>  Give the access point an IP address such as 192.168.0.1.
2>  Make sure wireless is switched on.
3>  Take note of the name of the wireless network (SSID).
4>  Connect an Ethernet cable from the back of the Expert to the

access point.

5> Set the IP address of the Expert: Turn

key to System, select [Network

Settings], press [Local Area Network],

then press [IP address] and change the

IP address to 192.168.0.2. press [Save

Settings] to store it.

6> On the iPod Touch or iPhone go to

Settings > Wi-Fi.

7> Ensure Wi-Fi is set to on.
8> Select the wireless network from the list,

the name you took note of earlier.

9> Select the blue arrow next to the

network name to change settings for that

network: