avolites pearl exper ttitan ユーザーズマニュアル
Copyright Avolites Limited 2010
1. Setting up the console - Page 13
PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00
1. Setting up the console
This chapter contains: Connecting mains power, DMX lines, VDUs;
configuring the console and the various VDU windows; guide to where
everything is on the console; loading and saving shows.
This manual applies only to the Pearl Expert Titan console but we’ll
This manual applies only to the Pearl Expert Titan console but we’ll
refer to it simply as “the Pearl”. If you are using the classic Pearl
Expert, or the Pearl 2008, 2004 or 2000 consoles, they have their
own manuals as the operation is significantly different.
This manual includes instructions for the optional Expert Touch Wing.
This manual includes instructions for the optional Expert Touch Wing.
Note: You can also operate the Pearl Expert Titan in “classic” Pearl
Expert mode by rebooting the console into the desired mode.
1.1
Guide to the console
The Pearl has four main control areas:
The Master faders set overall levels on the console
The Preset faders/handles select and control individual fixtures
The Master faders set overall levels on the console
The Preset faders/handles select and control individual fixtures
(and you can store cues and chases here too)
The Playback faders and rollers select and control cues and
The Playback faders and rollers select and control cues and
programs
The Programming and setup controls configure and program the
The Programming and setup controls configure and program the
console
Preset faders / handles
Master faders
Playback faders and
page select rollers
Programming and
setup controls