avolites pearl exper ttitan ユーザーズマニュアル
Copyright Avolites Limited 2010
Page 24 – 1. Setting up the console
PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00
Visualiser is shown in a workspace window, either on the touch
screen or on the external monitor. Press [Window Options] then
[Move Screen] on the View menu to move it between the touch
screen and external monitor.
Configuration buttons for Visualiser are provided in the context button
Configuration buttons for Visualiser are provided in the context button
area in the top right of the Touch Wing screen, or on the context
menu at the top right of the window if you aren’t using the Touch
Wing.
•
The operation of Visualiser is not covered in this manual, please
refer to the Visualiser manual.
Auto Patch
The Auto Patch function automatically creates a Visualiser rig from
The Auto Patch function automatically creates a Visualiser rig from
your Pearl show. When you start Visualiser using softkey A on the
View menu, Visualiser will open with an automatic representation of
your patch.
You will see the fixtures laid out on screen as they are on the console,
You will see the fixtures laid out on screen as they are on the console,
so any spaces between fixtures will be preserved and fixtures patched
to the top row of presets will be shown above fixtures patched to the
bottom row of presets.
The Visualiser will start in run mode, with the simulator tab selected
The Visualiser will start in run mode, with the simulator tab selected
so you can start controlling lights immediately.
Multiple dimmers patched to one handle will appear as a singe fixture
Multiple dimmers patched to one handle will appear as a singe fixture
in Visualiser.
Fixture selection
When a fixture is selected on the console, it is highlighted in blue in
Fixture selection
When a fixture is selected on the console, it is highlighted in blue in
Visualiser.
1.3.5
The Heads-Up Display (HUD)
The HUD window shows you what is stored in each fader and button
on the console: cues, chases, fixtures, dimmers, palettes, and fixture
groups. Any legends you enter are shown here.
The HUD window is a workspace window and is displayed by pressing
The HUD window is a workspace window and is displayed by pressing
View then [Open Workspace Window] then [HUD]. It may be moved
around and resized using the normal workspace window controls.
Fixtures are highlighted in dark blue if in the programmer and in light
Fixtures are highlighted in dark blue if in the programmer and in light
blue if selected. Only fixtures, palettes and groups stored in the
preset handles on the console are shown, handles on the Touch Wing
are not shown on the HUD.