avolites pearl exper ttitan ユーザーズマニュアル
Copyright Avolites Limited 2010
5. Shapes - Page 61
PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00
•
You can run more than one shape at a time by repeating the
above procedure. You can run several shapes on one fixture.
•
Press [Shape Generator] then [Edit] to show what shapes are
running.
•
Use the Shape mode of the channel grid window to show the
shape running on each fixture. To show the channel grid, press
View then [Open Workspace Window] then [Channel Grid] or
press the dedicated Channel Grid button.
•
If you apply the same shape to two different groups of fixtures,
the shape will appear twice on the shape list. You can edit the
two shapes separately to give different directions, speeds etc
(see later)
•
Each shape is designed to work on a particular attribute.
Obviously if the fixtures don’t have the attribute, you will not
see any effect if you use the shape.
•
Each shape has a default size and speed setting (defined in the
shape file).
5.1.2
Changing size and speed of a shape
It is easy to change the size and speed
of a shape after it has first been created.
If the display above the wheels is
showing Phase rather than Size/Speed,
press softkey E to select [Adjust Speed
and Size].
1> Control the speed of the shape
using the left hand wheel.
2> Control the size of the shape using
the right hand wheel.
3> The size and speed is shown above the wheels on the display.
Other things to know about size and speed of shapes:
•
If you are using the Touch Wing, the wheels on the console are
used to control size/speed, not the wheels on the Wing.
•
If you have more than one shape running, the controls operate
on the most recent one. You can edit the parameters of any
shape that’s running using the Edit Shape function, see section
•
The minimum size is zero. This will “hide” the shape, and the
fixture will resume its previous settings. The shape is, however,
still active.
•
You can edit the shape
individually on each
fixture by selecting the
fixtures you want to
change. The HUD
shows the individual
shape parameters for each fixture, or you can use the Shape
mode of the channel grid window to show the shape running on
each fixture. To show the channel grid, press View then [Open