avolites pearl exper ttitan ユーザーズマニュアル
Copyright Avolites Limited 2010
Page 68 – 6. Cues
PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00
active in any other playbacks. This is useful to avoid the fixtures
visibly moving into position or changing colours or gobos when
you raise the fader of the cue. To assign Preload, hold Avo Shift
and press [Edit Key Profile], then press the button you want to
assign (also see section 11.3.4 on page 119.) Note that this will
assign the function to all buttons of the same type. Also if you
are using one of the system key profiles, which are not editable,
you will need to select or create an editable key profile first.
6.2.3
Changing playback pages
You change playback pages using the Roller.. Each roller has 3 pages
set using the Roller Page buttons just above the left hand roller.
If you have stored cues on the preset faders, you select different
If you have stored cues on the preset faders, you select different
pages of preset faders using the Pages of Fixtures buttons above the
numeric keypad.
•
Playbacks which are fired when you change page remain active.
If you want to fire a cue on a fader which is already on from a
previous page, lower the fader to zero then raise it again. The
cue from the previous page will stop and the cue from the new
page will fire.
•
If you return to a page with an active playback, the fader will
not resume control of the playback until it matches the current
level of the playback. This prevents the playback level
“jumping” when the fader is first moved.
•
You can set a legend for each page of the A and B roller. The
legend is shown on the LCD screen and on the HUD. Use [Set
Legend] from the main Program menu then [Page Legends].
While in this menu you can change the Roller position to set
legends for different pages.
6.2.4
Releasing running playbacks
You can release a running playback to its previous state by pressing
the blue Off button, then the Select button of the playback to be
released. Channels will release back to their state in the previous
playback until no playbacks are left to be released, at which point
they will go to the power-on state. You can release all running
playbacks by pressing the blue Off button then [Release all
playbacks].
Channels will always release with a fade time of 2 seconds.
You can set a mask to release only some channels from the playback
Channels will always release with a fade time of 2 seconds.
You can set a mask to release only some channels from the playback
using the [Release Mask] option in the Playback Options menu.
6.3
Edit
6.3.1
Editing a cue
You can edit any part of a cue you have already saved simply by
making the changes and saving the new information on top of the
cue.
1> Press Clear to empty the programmer.