avolites pearl exper ttitan ユーザーズマニュアル
Copyright Avolites Limited 2010
Page 94 – 8. Cue Lists
PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00
3> Press Clear to make sure the programmer is empty.
4> Make the changes that you want to the current step.
5> Press Rec. Step, then select [Replace], [Merge] or [Insert After]
4> Make the changes that you want to the current step.
5> Press Rec. Step, then select [Replace], [Merge] or [Insert After]
to save the changes.
6> Press
the
↔
button to jump on to the next step.
You can edit the times for a cue using the Rec Times button of the
controller as follows:
1> Fire the cue list by raising its fader.
2> Use Wheel A to select the cue number you want to change then
2> Use Wheel A to select the cue number you want to change then
the white
↔
button above the Snap Back button to jump to it.
3> Press the Live Time button to set the times for the current step,
or the Next Time button for the next step. The Live and Next
step numbers are shown on the display above the controller
wheel.
4> Use the softkeys to set the times, linking and overlap settings
times). If you set the [Link to next step] option to On, then the
next cue will not wait for the Go button.
5> Press
the
↔
button to jump on to the next step.
You can also use Unfold to set the times as described in the Unfold
section above.
8.3.3
Editing a cue list while recording
You can edit cues while you are in the Record Cue List menu.
1> Press [Cue Number=x]
and type the cue number
to be edited.
2> The Pearl will jump to the
cue and show the output.
3> Make the changes that
you want to the
programming of the
current step, or to the
timings using [Edit Cue x
Times].
4> Press [Update Cue x] to
save the changes..
You can’t change the cue
number using this menu – if you
press [Cue Number] this will
change the cue you are editing.
Use [Advanced Options] to
change cue numbers.