Sony SNT-V304 ユーザーズマニュアル

36

Recently executed commands are recorded in the log
file on the video network station. The log file is used
to check whether a special event was executed, such as
whether a command was issued before or after an
alarm occurred. It is also used as a troubleshooting tool
to resolve operational problems.

Display the video network station monitor screen
in the Web browser, and click the [Admin] button.
The “Administration overview” page (for setting
and administration) appears.

Click the [Network Station] icon.
The [General Settings] screen appears.

Click the [View Log File] button.
The “Log file Events” page opens showing all
commands executed since the system was last
restarted.

The log file is saved as a text file that can be opened
with a text editor. The following information is
typically found in the log file.

Fri Apr 30 09:56:35 Info :Initialize video decoders
Fri Apr 30 09:56:41 Detection of color standard.
Fri Apr 30 09:56:41 Saa7111Decoder ::Found PAL
BGHI/NTSC M.
Fri Apr 30 09:56:41 Detection of color standard.
Fri Apr 30 09:56:42 Saa7111Decoder ::Found PAL
BGHI/NTSC M.
Fri Apr 30 09:56:42 Initialize serial ports device
Drivers
Fri Apr 30 09:56:42 serialHAL ::mode :using RS232
Fri Apr 30 09:56:42 serialHAL ::mode :using RS232
Fri Apr 30 09:56:42 Create Nulldriver,port 2
Fri Apr 30 09:56:42 Initialize Juliette chip
Fri Apr 30 09:56:42 Start script
Fri Apr 30 09:56:42 Start SoftWatchdog
Fri Apr 30 09:56:42 Create camera device port
connection