Sennheiser HMEC 352 500567 プリント

製品コード
500567
ページ / 1
Notes on the correct use of the headsets!
Warning! This headset can cause the aircraft communication
equipment (ie: intercom and radios) to function differently than
intended if the latter does not support the operation of the
headset. This warning applies for the following models:
Product Name
Part No.
Cat. No.
HMEC 25-BA
025-230-215
004438
HMEC 25-KAL
025-230-615
004935
HMEC 25-KAP
025-230-315
004567
HMEC 25-KAP-1
025-230-316
004568
HMEC 25-KAP-2
025-230-715
005307
HMEC 25-KAP-2 DIAMOND
025-230-715
500528
HMEC 45-KAP
045-230-315
004570
HMDC 25-BAA
004463
HMEC 302
300-231-715
005306
HMEC 352
300-231-7150
500567
HMEC 46-KP
046-35-999-3111
500475
HMEC 46-V-KP
046-35-999-3161
500476
The above models obtain their operating DC supply voltage via the
tip (pin 1) of the microphone plug (PJ 068 or equivalent). The
communication equipment must provide the DC supply at this
contact in order to activate the NoiseGard™ function of the
headset. However, some aircraft communication systems use this
contact for the PTT (push to transmit), or other, function. For this
reason, inserting the microphone plug can cause the PTT function
to be partly or completely triggered unintentionally.
If you have any questions in this connection, please contact the
aircraft manufacturer or an approved avionics service company.
Sennheiser electronic GmbH & Co. KG
Printed  in  Germany 
520174
Publ. 10/06                            
BB_HMECdiv_1006_520174_1006_Sp2.fm  Seite 2  Freitag, 3. November 2006  11:12 11