Toshiba sd-63hk ユーザーズマニュアル
35
Selecting progressive scan
1
The progressive scan capability provides the highest resolution pictures with less flicker and line structure.
If you are using the Component video sockets, but are connecting the unit to a standard (analog) television, set
PROGRESSIVE to Off.
If you are using the Component video sockets for connection to a TV or monitor that is compatible with a progressive
scan signal, set PROGRESSIVE to On.
If you are using the Component video sockets, but are connecting the unit to a standard (analog) television, set
PROGRESSIVE to Off.
If you are using the Component video sockets for connection to a TV or monitor that is compatible with a progressive
scan signal, set PROGRESSIVE to On.
Note: This unit supports the progressive scan only for NTSC DVDs.
2
Preparation:
• Connect to a TV equipped with component sockets.
• Turn ON the TV and set it to the corresponding video input
• Turn ON the TV and set it to the corresponding video input
mode.
• Set the VIDEO OUTPUT selector switch on the rear panel
to COMPONENT position.
• Press DVD/FM/AM selector to select the DVD mode.
Notes:
• JPEG CDs can not be play back with the progressive scan-
• JPEG CDs can not be play back with the progressive scan-
ning mode.
• Some discs may not be played back with the progressive scan-
ning mode correctly because of the disc characteristics or re-
cording condition.
cording condition.
• If your TV does not accept the progressive scan format, the
picture will appear scrambled if you select progressive scan
output from the unit. In such a case, select PROGRESSIVE
scan Off.
output from the unit. In such a case, select PROGRESSIVE
scan Off.
There are two types of source content in pictures
recorded in DVD video discs: film content (pictures
recorded from films at 24 frames per second) and
video content (video signals recorded at 30 frames per
second).
recorded in DVD video discs: film content (pictures
recorded from films at 24 frames per second) and
video content (video signals recorded at 30 frames per
second).
When the unit plays back a film source material,
uninterlaced
progressive output signals are created using the origi-
nal information. When a video content is played back,
the unit interleaves lines between the interlaced lines
on each to create the interpolated picture and outputs
as the progressive signal.
uninterlaced
progressive output signals are created using the origi-
nal information. When a video content is played back,
the unit interleaves lines between the interlaced lines
on each to create the interpolated picture and outputs
as the progressive signal.
■ To select PROGRESSIVE scan Off
On the step 1 above, select “PRO. OFF”.
Progressive scan
Load an NTSC DVD disc.
Press PROGRESSIVE in the stop mode.
The current progressive mode appears on the
display window for 4 seconds.
Press PROGRESSIVE again to change the
progressive mode “ON” or “OFF” during the
progressive mode appears on the display win-
dow.
Press PROGRESSIVE in the stop mode.
The current progressive mode appears on the
display window for 4 seconds.
Press PROGRESSIVE again to change the
progressive mode “ON” or “OFF” during the
progressive mode appears on the display win-
dow.
• The unit recognizes the picture source (film or
video) of the current disc according to the disc
information.
information.
Press PLAY to start playback.