Hitachi VM-H835LA ユーザーズマニュアル
Loading Clock and Remote Control Batteries
17
Install the batteries to prevent misplacing them.
Clock Battery
1. Pull out the battery holder.
1. Pull out the battery holder.
2. Insert the battery with the "+" terminal facing up.
3. Fully insert the battery holder into the camcorder.
Remote Control Battery
1. Push the tab to the right of the remote control and hold it, then remove the battery
holder.
1. Push the tab to the right of the remote control and hold it, then remove the battery
holder.
2. Press the PLAY button and hold it for about two seconds.
3. Insert the battery with "+" terminal facing up as shown in the figure.
4. Replace the battery holder with battery in the remote control making sure that it is
fully inserted.
3. Insert the battery with "+" terminal facing up as shown in the figure.
4. Replace the battery holder with battery in the remote control making sure that it is
fully inserted.
WARNING: KEEP THE BATTERIES AWAY FROM CHILDREN AND PETS.
IF SWALLOWED CONSULT A PHYSICIAN IMMEDIATELY FOR EMERGENCY
TREATMENT.
IF SWALLOWED CONSULT A PHYSICIAN IMMEDIATELY FOR EMERGENCY
TREATMENT.
Note: Replace the battery with 3V micro lithium cells such as Maxell CR2025 or its
equivalent.
Note: Dispose of batteries safely in accordance with local laws. Do not dispose of in fire.
Note: Do not short circuit the batteries.
Note: Do not take apart the batteries.
Note: Do not hold the batteries with the metallic tweezers.
Note: Do not recharge the batteries.
equivalent.
Note: Dispose of batteries safely in accordance with local laws. Do not dispose of in fire.
Note: Do not short circuit the batteries.
Note: Do not take apart the batteries.
Note: Do not hold the batteries with the metallic tweezers.
Note: Do not recharge the batteries.