Siemens HIPATH 3000 ユーザーズマニュアル
6office.fm
A31003-G2540-A100-3-76A9, 04/2003
optiClient 130 V4.0, User Manual
optiClient 130 V4.0, User Manual
8-7
Nur für den internen Gebrauch
Using the optiClient office
Making calls
8.2.3
Extended Dialing Functions per Drag & Drop
Apart from the described options for calling a number, you can also insert a phone number from
another application (e.g., a customer management application) into the optiClient office Dial
window via a simple Drag & Drop operation. The phone number is called automatically.
another application (e.g., a customer management application) into the optiClient office Dial
window via a simple Drag & Drop operation. The phone number is called automatically.
If the HiPath System is not configured to allow direct access to an external line, hold down the
Ì k ey while performing the drag and drop operation. On dialling the phone number, the
prefix needed to access an outside line for your location is then automatically read from the
Windows Control Panel (Telephone and Modem Options) (cf. Section 2.3, “Configuring Locati-
on Information”).
prefix needed to access an outside line for your location is then automatically read from the
Windows Control Panel (Telephone and Modem Options) (cf. Section 2.3, “Configuring Locati-
on Information”).
>
When calling external parties, it is often necessary - depending on the PBX config-
uration - to dial a so-called dial prefix, e.g. "0“, before the actual number or to record
this prefix when defining the speed-dial key.
uration - to dial a so-called dial prefix, e.g. "0“, before the actual number or to record
this prefix when defining the speed-dial key.