Honeywell CM907 ユーザーズマニュアル

FINE TUNING THE CM907

Now choose which one of the following parameters you would like to change:

i) Change the time format

‘CLOCK SELECT’ should be displayed on the screen - press the or

buttons to select the preferred time format (12=AM/PM format, 24=24hr format)

and the display will flash, indicating a change has been made. To confirm this

change press the green button.

ii) Reset the built-in program to the factory default

Press the time button once. The display will show ‘RESET PROGRAM’.

Press the or buttons to select the preferred setting (0=user program,

1=factory program) and the display will flash, indicating a change has been

made. To confirm this change press the green button.

iii) Enable or disable summer/winter time change

Press the time button twice. The display will show ‘AUTO CHANGE’. Press

the or buttons to select the preferred setting (0=disabled/Off, 1=enabled/

On) and the display will flash, indicating a change has been made. To confirm

this change press the green button.

To exit the user mode move the slider switch to the AUTO, MAN or OFF

position.