Philips dvdr3480 ユーザーズマニュアル

28

Use ‘Timer Recording’ to automatically 
start and stop a recording at a later date/ 
time. The recorder will tune to the right 
programme channel and begin recording 
at the specifi ed time.

With this recorder, you can schedule up 
to 7 recordings for a limit of one month 
period.  During timer recording, changing 
of recorder’s channel is not possible.

Before you start ...
Make sure that the system clock is 
correct.

TIMER

OK

(VPS/PDC is not available in some countries).
‘VPS’ (Video Programming System) or 
‘PDC’ (Programme Delivery Control) is 

used to control the start and end time of 
TV channel recordings. If a TV programme 
starts earlier or ends later than was 
scheduled, the recorder will then switch on 
and off at the correct time.

VPS/PDC is intended to record the entire 
programme. To set a timer that is longer/
shorter than the VPS/PDC broadcast 
time, you must turn off the VPS/PDC.

A

 Turn on the TV to the correct viewing 

channel for the recorder.

B

 Press TIMER on the remote control.

 The timer recording list appears.

Timer Recording List

01.01.2007  09:15:10

Date    Start    End     Source     Quality     VPS/PDC   Repeat   Status

Back

BACK

Exit

TIMER

Edit

OK

C

 Select an empty list in the menu and 

press OK to access the timer entry 
screen.

D

 Use ST keys to change the value of 

each setting and use W X keys to move 
within the entry fi eld. 

  You may also use the numeric keypad on 

the remote control to key in the setting 
value.

{ Date }
–  Date for recording (day/month).

{ Start }
–  Start time of recording (hours:
minutes).

{ End }
–  End time of recording (hours:minutes).

{ Source }
–  Select the TV channel or the correct 
input source (EXT2 or CAM), which you 
have used to connect the external device.

dvdr3480-05n31_eng_27232a.indd   28

dvdr3480-05n31_eng_27232a.indd   28

2007-11-02   11:52:00 AM

2007-11-02   11:52:00 AM