Philips PET738 ユーザーズマニュアル

Auto search provides an overall search for all available channels
in your country.
- Press OK to start auto search.The screen will display

“running xx%”.

- Upon completion, the screen will display “finished”.
When search is completed, the first channel found will be
displayed.
A channel counter will indicate the number of channels that
can be found.

Before installation, please make sure that you are in an area
with sufficient TV signal coverage. As the TV signal is weaker in
an indoor environment, please always connect to a TV wall
socket for the best reception quality when using it at home or
indoor.

Antenna connection
Before you start to search for TV channels, connect the DVD
player to the antenna as shown.

Setup you TV
1 Press OPTIONS and select SOURCES > TV

2 In TV  mode, press  SETUP, the TV Setup menu will be

displayed to show the following available functions.

- area setup:

Select your area

- tv mode:

Select a TV mode

- auto search:

Run auto search for all available TV
channels

- ch. manage:

Manage channels by deleting or
renaming them

- fine tuning:

Fine tune each TV channel

- Please make sure that you select the correct area that

matches your local TV system.

- Use 

3/4 key to select your area.

There are several modes available.

For normal on-the-air TV reception

For cable TV reception

The standard TV system used in various
countries. E.g. China use PAL TV system,
Russian use SECAM TV system

E.g. China is PAL DK, Russian is SECAM D.

2

2

3

4

Note Sometimes, there may be duplicated or empty
channels found after Auto Search.This is due to TV signal
interference in some areas, not a malfunction of your
product.

You can perform channel management

current ch: It displays the channel number of the TV
channel you are currently watching.

del. current:You can delete the current channel. E.g. If a
duplicate or empty channel was found due to
interference, you can delete those channel.

rename:You can rename the channel number. The
renamed channel will overwrite the existing one. Please confirm
when you rename the channel.

Please remember to save before you exit ch. manage menu.
Otherwise, your changes will not be captured.

When there is interference in watching the TV, you can fine
tune the frequency of the reception.

- In the fine tuning menu, press 

1 / 2 key to decrease /

increase the frequency of the reception.

- You can press 

1 / 2 keys until a better picture quality with

less interference is found.

- Please remember to save before you exit the fine tuning

menu. Otherwise, your tuning will not be captured.

To change channels
- In TV mode, you can either press CH-/CH+ to change

channels.

- Or, you can enter the channel number with the numeric

keys and press OK.

To change volume
- Press vol+ / vol – to adjust the volume level.

- Press s to mute the volume. Press s again to restore

sound.

1 2

1 16 2

by-pack
antenna

home
antenna