Frigidaire 137168200a ユーザーズマニュアル

10



A wiring diagram and technical data sheet are located 

under the washer top panel, on top of the detergent 

dispenser housing.

Check to ensure the power is off at a circuit breaker/

fuse box before plugging the power cord into an outlet.

Grounding type

wall receptacle

Power cord with

3-prong  grounded plug

  1  Snap one end of the drain hose hanger (shipped 

in washer drum) onto the drain hose. Continue 

wrapping it around the hanger and snap it in place.

  2  Place the hook end of the drain hose in the drain 

opening. Secure the drain hose with the cable 

tie (provided in the enclosure package) to the 

standpipe, inlet hose, laundry tub, etc. so the hose 

does not pull out from the force of the water.

  3  Plug the power cord into a grounded outlet.

  4  Turn on the power at a circuit breaker/fuse box.
  5  Carefully slide the washer to its final position.  

Recheck for level and rock corners for stability. 

Remove and discard door tape.

  6  Read the Use & Care Guide provided with the 

washer. It contains valuable and helpful information 

that will save you time and money.

  7  If you have any questions during initial operation, 

please review the “Service Prevention Checklist” in 

your Use & Care Guide before calling for service.

  8  Place these instructions in a location near the 

washer for future reference.