Mitel 5005 ユーザーズマニュアル
User Guide
- 9 -
Mounting On The Wall Using The Desktop Stand
The 5005 IP phone can also be mounted on a wall using the desktop stand. To mount the phone in
this fashion, attach the stand to the base of the phone in an inverted position and then place the
stand on the wall mounting bracket as illustrated.
this fashion, attach the stand to the base of the phone in an inverted position and then place the
stand on the wall mounting bracket as illustrated.
Note: While mounting screws or a standard wall mount bracket may be used to mount the phone
on the wall, standard telephone jacks are not used as the phone is connected directly to the LAN.
on the wall, standard telephone jacks are not used as the phone is connected directly to the LAN.
Call Handling
About Call Handling
Please ensure that the designation card on the 5005 IP Phone, sitting on your desk, has the same
annotations as shown below. If not, please contact your System Administrator.
annotations as shown below. If not, please contact your System Administrator.
Note: The three bottom-most programmable function keys should be labelled REDIAL,
MESSAGE and TRANS/CONF. The top-left programmable function key will automatically be
assigned as the primary LINE key.
MESSAGE and TRANS/CONF. The top-left programmable function key will automatically be
assigned as the primary LINE key.