Memorex mph6935 ユーザーズマニュアル

Press and hold 

until a tone sounds and

“

Memory Store

” is displayed.

Press the 

▲ or ▼ keys or number keypad to

select the memory location you would like to edit.

Press 

.

The following screen appears with the memory
location number that you have selected in 
the display.

For example, if you selected memory location number 1,

the display shows memory 1 selected.

Press the 

▲ or ▼ key to select "

Edit Memory

",

then press 

.

The following screen appears. The cursor flashes
indicating that the display is ready for the name to
be edited.
When a name has not been stored, the cursor
appears at the beginning of the second line.

Press the number keys, 

s

, 

t

, or

to edit the name. (See page 19.)

To edit only the phone number, skip this step.

Press 

.

The following screen appears. The cursor flashes
indicating that the display is ready for the number
to be edited.

Use the number keypad, 

s

, 

t

,

or 

key to edit

the phone number. The phone number cannot
exceed 20 digits. (See page 19.)
When the phone number is not to be edited, skip
this step.

Press 

.

The handset beeps and displays the confirmation
screen. The memory storage is complete.
For example if you store a name and number into
memory location number 1, the display shows 
“

Memory 1 Stored

”.

After about 2 seconds, “

Memory Store

” 

is displayed.

Press 

to return to standby.

MPH6935_OM Eng  3/12/02  3:07 PM  Page 23