Motorola DCT6200 ユーザーズマニュアル

 

DCT6200/DCT6208 User Guide 

 

37 

Problem Possible 

Solution 

There is no video 
on the TV screen 

Verify that the TV is powered on and set to the 
appropriate input source for the DCT*. 

Verify that the DCT* is powered on and tuned to an 
authorized cable channel. 

Verify that the coaxial cable feed is firmly connected to 
the DCT* and the wall jack. 

The DCT* DVI output may not yet be enabled. Use the 
component video (Y Pb Pr) output instead. 

If the DCT* video output is connected to a home theater 
unit, verify that the home theater unit is powered on and 
set to the appropriate input source. 

Not all HDTVs can display every output format (1080i, 
720p, 480p, or 480i) available on the DCT*. Enter the 
User Settings menu and cycle through the available 
output formats until a picture displays on the TV. 

Verify that all video cables between the DCT* and the TV 
are firmly connected. 

There are no 
graphics, closed 
captions, or 
program guides 
appearing on the 
TV screen 

The DCT* cannot generate graphics on all video outputs 
at all times. If the DCT* is set to 1080i, 720p, or 480p 
output format, graphics are only available on the high 
definition video outputs (DVI and component video). If 
the DCT* is set to 480i, graphics are available on all 
video outputs. 

If the DCT* is connected to a standard definition (SD) 
TV, verify that the DCT* is configured to use the 480i 
output mode. 

Verify that closed captions on the DCT* have been 
enabled in the User Settings menu.