Motorola dvr dch3416 ユーザーズマニュアル

 

9 

Before you move or change components on the subscriber’s entertainment system: 

•  Review the installation instructions.  
•  Determine if you are connecting to a standard analog NTSC TV (supporting an RF 

input), a composite (baseband) video input, or an S-Video input) or a High-Definition 
TV (supporting component video input, HDMI input, or an IEEE-1394 input). 

•  Determine if the subscriber has other equipment to be connected to the terminal 

(home theater or A/V receiver, VCR, etc.) 

•  Verify that you have the necessary cables and other required items. 
•  If the terminal was previously used, clear its hard drive before installing it at a new 

subscriber location 

On a previously-used cable terminal, delete all recorded programs from the hard drive 
before installing it at a new subscriber location. This prevents your new subscriber from 
viewing programming they may not have purchased or may not want to see. 

To prevent subscribers from accidentally deleting all of their recorded programs, a 
specific set of keystrokes is required to clear the hard drive. Having a TV connected is 
optional. 

To clear the hard drive: 

1.

  Start the diagnostics as described in the 

section; d 01 is displayed on the 

front-panel display. 

2.

  Using a remote control, within five seconds, press 

REPLAY

, 

MY DVR

 three times, and 

LIVE TV

. (On some remote controls, the 

MY DVR

 key may be labeled 

LIST

.) 

3.

  If you correctly enter this key sequence in five seconds or less, the hard drive is 

cleared and the front-panel displays Clr. 

4.

  If Clr is not displayed, re-enter the key sequence in step 2. 

5.

  If Clr is displayed, press any other key to reset the terminal, turn it off, and complete 

the clearing process.