Motorola saber rvn4002k ユーザーズマニュアル

PC Configuration is important in running the SABER Radio Service Software. When F3 is
selected, the screen shown in Figure 6 will come up.  Each data field can be selected by
pressing the ENTER key and entering the proper data for that field.  "Toggle" selection is made
only on the last entry in which the UP/DOWN arrow keys will toggle between the two data fields
listed. 

Figure 6. PC Configuration

Use the following steps to configure your computer:

1.

Enter the Archive Drive, or default disk drive where you plan to keep your archive files.
For example, if you have a hard disk system and want to save archive files on a floppy
disk  in drive A:, enter:

A:

for the Archive Path Name.  Press ENTER to continue.

For a floppy disk system, you must enter disk drive B: if you have SABER.EXE in drive A
and MOTOROLA.LBR in drive B. 

2.

Next, you must enter the Archive Path which is the path name of the archive disk where
all archive files will be kept.  On the Screen "\Data" is shown but  you may call this
directory any name you wish.  Remember to create a directory called "Data" if you enter
this directory name for the Archive Path.   

  MOTOROLA  Radio Service Software
  SABER                   Model:
  Ver.  R05.00.00

  Main.Setup.PC

Enter Drive

F1

HELP

F2

F3

F4

F5

PRINT

F6

F7

F8

SAVE

F9

RESET

DEFAULT

F10

EXIT

Archive drive:

Archive path:

Serial Port:

A

RSS\SABER\Data

COM 1

PC CONFIGURATION

R07.01.00

16

Software Installation