Motorola saber rvn4002k ユーザーズマニュアル
The Model Number field selects the specific model. The legend at the right of the screen
will change as you scroll through the model types and display the major characteristics of
each model. As with the Model Category, the selection made in this field will affect the
following field for Frequency Range. Only models with CN in the last 2 character positions
can be programmed into a 6D radio.
will change as you scroll through the model types and display the major characteristics of
each model. As with the Model Category, the selection made in this field will affect the
following field for Frequency Range. Only models with CN in the last 2 character positions
can be programmed into a 6D radio.
The Frequency Range field allows you to select a particular band within the model
previously selected. Note that this field may display several different bands to choose from,
but be sure to select the proper band that must match the radio you intend to program.
previously selected. Note that this field may display several different bands to choose from,
but be sure to select the proper band that must match the radio you intend to program.
Toggled options that change in conjunction to the three selections above:
Power Level:
LOW/HIGH
Frequency Band:
UHF/VHF/Mid-band
Radio Type:
PORTABLE/SUBMERSIBLE
Display Type:
NO DISPLAY/FULL DISPLAY
Keypad:
NONE/3 KEYS/FULL KEYPAD
Bandwidth:
NARROW BAND/WIDE BAND (VHF only)
Scan Option:
SCAN CAPABLE/----------
Use the UP/DOWN arrow keys to select between the Clear and Secure models and then
press the ENTER key to move to the next user selection. As you select the Model Number
and Frequency Range, these parameters change again, and you will be able to create a
radio personality file for your radio. The next step in creating your radio RPF is to exit this
screen by pressing F10 and select your Radio Feature Options.
press the ENTER key to move to the next user selection. As you select the Model Number
and Frequency Range, these parameters change again, and you will be able to create a
radio personality file for your radio. The next step in creating your radio RPF is to exit this
screen by pressing F10 and select your Radio Feature Options.
Change/Create/View Radio Personality
47