Multiquip MVC-40G ユーザーズマニュアル

Figure 3 shows the location of the components and general
maintenance parts.  The function of each component  is described
below:

1.

Hand Lift Handle – When lifting of the compactor by
personnel is required, use this hand lift handle. DO NOT
attach a crane or heavy lifting device to this handle to lift
the compactor.

2.

Lifting Bale – When lifting of the compactor is required
either by forklift, crane etc., tie rope or chain around this
lifting point.

3.

Handle Bar  – When operating the compactor use this
handle bar  to maneuver  the compactor.

4.

Belt Cover – Remove this cover to gain acess to the V-
belts. NEVER run the compactor without the V-belt cover. If
the V-belt cover is not installed, the possibility exist that
your hand may get caught between the V-belt and clutch,
thus causing serious injury and bodily harm.

5.

Vibrating Plate – A flat, open plate made of durable cast
iron construction used in the compacting of soil.

6.

Vibration Case – Encloses the eccentric, gears and
counter weights.

7.

Gasoline Engine – This plate compactor uses a 4-stroke,
air cooled ROBIN EH09-2D gasoline engine. Refer to the
ROBIN  owner's manual for  engine information.