GE 27957 ユーザーズマニュアル

2. Press 1, 2 or 3 on the base touch-tone pad to enter your selection, or use 

the REVIEW or NEXT button on the base to scroll to your selection.

3. Press FLASH/PROGRAM again to store your selection.

NOTE: This setting may only be made with the base.

You may set the number of times you want the phone to ring before the 
answering system answers a call.
1.  Press the FLASH/PROGRAM button until RING TO ANSWER shows in the 

display. 5 is the default setting.

2. Press 3 or 5 or use the REVIEW or NEXT button to scroll to 3, 5 or TOLL.

NOTE: TOLL (Toll Saver) can save you the cost of a toll call when accessing 
your messages from another phone. If you have new messages, the unit 
answers after the 3rd ring. If you have no new messages, the unit answers 
after the 5th ring. You can hang up after the 3rd or 4th ring and save the pay 
telephone or long distance charge.

3. Press FLASH/PROGRAM again to store your selection. You will hear a 

confirmation tone.

NOTE: This setting may only be made with the base.

You can access the answering system from any tone dialing telephone in 
another location. The security code is required for remote access, and it 
prevents unauthorized access to your answering system. You may only 
change the security code at the base.

1.  Press the FLASH/PROGRAM button until SECURITY CODE  shows in  

the display.

2. Use the touch-tone pad to enter your new 3-digit security code. For 

example, press the 6, 2, and 8 number keys for security code 628. The 
default security code is 123.

NOTE: If you want to re-enter the security code, enter the numbers again and 
press the FLASH/PROGRAM button. The new numbers replace the old numbers.