GE 27957 ユーザーズマニュアル

2. If the originating unit is the handset, press the PAGE/INTERCOM button 

on the base to set up the intercom. Then press the MEMORY/conference 
button on the handset to retrieve the external caller. Three-way 
conversation begins, and CONFERENCE shows in the display. 

3. If the originating unit is the base, press the intercom button to setup 

the intercom. Then press the base MEM/CONFERENCE button on the 
base to retrieve the external call. Three-way conversation begins, and 
CONFERENCE shows in the display.

NOTE: A handset or the base may enter a conversation directly by pressing the 
TALK/call back button on the handset or the SPEAKER/CALL BACK button 
on the base while the other handset or the base is engaged with an external call.

The cordless handset and base each have their own separate memory 
storage areas. Store ten 15-character names and 24-digit telephone 
numbers in the handset memory, ten 15-character names and 24-digit 
telephone numbers in the base memory. 

NOTE: Press *TONE/EXIT (base) or TONE */exit (cordless handset) to exit 
memory.

1.  Press the MEM/CONFERENCE (base) or MEMORY/conference (cordless 

handset) button.

2. Press the desired memory location button (0 through 9 number keys) or 

use the REVIEW or NEXT button (base) or the CID/VOL (



or



) button 

(cordless handset) to scroll to the desired location. If the memory location 
is occupied, the stored name and number displays. If the memory 
location is unoccupied, EMPTY shows in the display.

3. Press the MEM/CONFERENCE (base) or MEMORY/conference (cordless 

handset) button again. The display shows ENTER NAME.