GE 27957 ユーザーズマニュアル

Provided you subscribe to Caller ID with Call Waiting service from your 
phone company, you may see who is calling when you hear the call waiting 
tone in the receiver. The CID information appears in the display after you 
hear the tone.

Press FLASH/PROGRAM to put the current call on hold and answer the 
incoming call. Press FLASH/PROGRAM again when you want to return to 
the first call. 

IMPORTANT: In order to use all of the features of this unit, you must 
subscribe to either the standard Name/Number Caller ID Service or Call 
Waiting Caller ID Service. To know who is calling while you are on the phone, 
you must subscribe to Call Waiting Caller ID Service.

This section shows you how to set up your answering system to receive 
incoming calls. Before you begin the setup, you must turn on the answering 
system.
•  Press the ANSWERER ON/OFF button to turn the answering system 

on and off. The new messages indicator flashes when you have new 
messages.

NOTE: The display shows “ANSWERER OFF ” when the answering system is off. 
The default status is on.

If you need additional assistance, press the MEMO button on the base and 
follow the voice instructions.

For best results when recording, you should be about nine inches from the 
microphone, and eliminate as much background noise as possible.
1.  Make sure the answering system is ON.
2. Press and hold the ANNOUNCE button on the base while you record  

the announcement.