Hitachi cml155xwv plus ユーザーズマニュアル

 

 

17 

01-2)E2 英(2)(5030032724)-7.25.doc  2002/7/26  下午 03:22 

 

4. Plug the analog (or digital) video signal cable into the Analog (or Digital) Video Input 

port on the back of the display (“ANALOG IN” (or “DIGITAL IN”) as shown above). 

5. Connect the other end of the video cable into your computer’s video port. (Please check 

your computer’s documentation if you’re not sure where the port is located.) 

6. Connect the audio-mic cable (green) from “AUDIO1” port of the display to the line-out 

port of your PC and connect other wire (red) from “MIC” port of the display to the line-in 
port of your PC. 

7. Plug the S-video signal (or CVBS) cable into the S-video (or CVBS) Input port on the 

back of the display (“S-VIDEO” (or “CVBS”) as shown above). 

8. Connect the other end of the video cable into your AV devices S-video (or CVBS) output 

port. 

9. Connect the Two-wire audio cable from “AUDIO 2” port of the display to the audio 

output port (white plug connect to the “AUDIO L” and red plug connect to the “AUDIO R”) 
of your AV device.