Hitachi cml155xwv plus ユーザーズマニュアル

 

 

 

28 

01-2)E2 英(2)(5030032724)-7.25.doc  2002/7/26  下午 03:22 

 

Adjustment in the “Management” submenu 

To adjust Management settings you should follow the steps below: 

1.  Bring-up the OSD “Main Menu”. 

2. Use ‘Select’ button to move forward to Management icon and highlight it. This will 

bring-up the “Management” submenu. There are seven items for your choice in this 
submenu: Exit, Mode Info, OSD Display,  Language, Source and Recall Factory 
Setting. 

3. Use ‘Right’ and ‘Left’ keys to choose the item you need and then press ‘Select’ to 

highlight and select it. 

 

  

 

 

 

If ‘Exit’ is selected, it will exit and close the OSD. 

If ‘Mode info’ is selected, it will show-up “Mode Info” submenu with resolution, H. and 

V. frequency information displayed in it. 

If ‘OSD Display’ is selected, it will bring-up “OSD Display” submenu. Use ‘Right’ and 

‘Left’ buttons to highlight and ‘Select’ key to select H. or V. Position. This will show-up 
the corresponding bar on menu, and you can adjust its setting by ‘Right’ and ‘Left’ 
buttons. ‘Right’ button will move the OSD menu to the right or upward, and ‘Left’ 
button will move the OSD menu to the left or downward. 

 

 

If ‘Language’ is selected, it will bring-up “Language” submenu. Use ‘Right’ and ‘Left’ 
buttons to highlight and ‘Select’ key to activate the language you preferred and exit 
this submenu. 

 

 

If ‘Source’ is selected, it will bring-up “Source” submenu. Use ‘Right’ and ‘Left’