Microtek gnc m vx2 0506 ユーザーズマニュアル

Check the air vents at the back and at the bottom of the

projector. If the filters are clogged from dust, clean the filters

as shown in the steps on page 36.

If the projector remains overheated after the filters have been

cleaned, please contact the dealer of this projector to

request service for checking the cooling fan and the internal

circuitry.

There is a problem with the internal circuitry. Please contact the dealer

of this projector for service.

The Lamp Led Indicator remains red: The life of the lamp has ended;

please replace with a new lamp now.

The Lamp Led Indicator is blinking red: There is a problem with the

lamp or the power supply of the projector. Please contact the dealer of

this projector for service.

Attention: Never try to do any maintenance on the projector that is not

indicated in this manual.

The following are solutions to problems with the image or sound:

Check to ensure that the Power Led Indicator and the Lamp

Led Indicator are both green, and that the lens cover is

removed from the lamp of the projector.

Check to ensure that the video source is correctly selected.

You may press the 

 button on the Remote Control

or on the operation panel of the projector to select the video

source.

Check the type of video output signal your computer is

ＶＸ２．ｐ６５

02-10-18, 11:05

46