GE 55909320 ユーザーズマニュアル
15
Most telephone systems use tone dialing, however, some may still use
pulse dialing. Depending on your telephone system, set the dialing mode
as follows:
pulse dialing. Depending on your telephone system, set the dialing mode
as follows:
1. Press the flash/program button until
SET TONE/PULSE >1TONE 2PULSE
shows on the display. The default setting is
TONE
.
2. Use the touch-tone pad to select
1TONE
or
2 PULSE
, or press the cid/
messages (< or >) button to scroll to
1TONE
or
2PULSE
.
3. Press flash/program again to store your selection. You will hear a
confirmation tone.
NOTE:
If you aren’t sure which dialing system you have, set the telephone to
tone dialing and make a test call. If the call connects, the setting is correct. If
the call does not connect, set the telephone to pulse dialing.
the call does not connect, set the telephone to pulse dialing.
S
ET
D
AY
NOTE:
This setting may only be made with the base.
NOTE:
If you want to keep the current day, press the flash/program button
again to skip when the display shows SET DAY SU M T W H F S.
1. Press the flash/program button until
SET DAY SU >M T W H F S
shows
on the display. The default setting is
M
(Monday).
2. Press the cid/messages (< or >) to scroll to the day.
M
(MONDAY) is
default setting.
SET TONE/PULSE
>
1TONE 2PULSE
SET DAY
SU
>
M T W H F s