Mitsubishi Electronics colorview xd480u ユーザーズマニュアル

EN - 21

By pressing the EXPAND button on the remote control, 
you can magnify the image to view the details. You can 
view the image in its original size in the REAL mode.
•  The EXPAND mode doesn't work with video or 

S-video signal. 

•  The EXPAND mode doesn't function with some  in-

put signals. For details, see page 33.

One of the special features of this projector is the 
picture-in-picture (PinP) mode. The PinP mode allows 
you to view the images from  different sources at the 
same time. 

To use the PinP mode
1.  Press the PinP button on the remote control. 
•  When you press the PinP button with the image from 

the COMPUTER/COMPONENT VIDEO IN terminal 
displayed on the screen, the image from the VIDEO 
IN or S-VIDEO IN terminal is displayed as the sub 
image. 

•  When the image from the VIDEO IN or S-VIDEO IN 

terminal is displayed, the PinP mode  isn't activated. 

2.  If necessary, select the desired external input source 

of the sub image by using the VIDEO 1 or VIDEO 2

 

button on the remote control or the VIDEO button on 
the control panel.

3.  Press the PinP button on the remote control. 

•  The PinP mode will be canceled.

To change the position of the sub image:
Press the 

 or  buttons on the remote control.

Important:
•  The motion may not run smoothly in the PinP mode.
•  The PinP mode isn't available with some input 

signals. For further information, see page 33. 

•  When the COMPUTER 1 or COMPUTER 2

 button 

on the remote control or the COMPUTER button on 
the control panel is pressed, the PinP mode will be 
canceled. 

To stop the motion in the image temporarily (or to dis-
play a still image):
Press the STILL button on the remote control.
•  The image will freeze temporarily.

To resume the motion in the image:
Press the STILL button on the remote control again.

Important:
•  Do not display a still picture for a long time because 

the afterimages may persist on the screen.

1.  Press the MENU button. 

2. Press the 

 or  to select the FEATURE menu.

3.  Press the ENTER button.

4. Press the 

 or  button to select EXPAND MODE.

5. Press the 

 or  to choose EXPAND or REAL.

6.  Press the MENU button twice to exit the menu.

To use the EXPAND mode:
1.  Press the EXPAND button.  

•  You can select the area to be magnifi ed by press-

ing the 

, , , or  button on the remote 

control.

•  You can change the magnifi cation of the selected 

area by pressing the + or - button.

2.  Press the EXPAND button again to the exit the EX-

PAND mode.
•  The regular operation screen will appear.

Important:
•  In the EXPAND mode, you can't adjust the volume.

To use the REAL mode:
1.  Press the EXPAND button.  
•  In the REAL mode, press the 

 or  button on the 

remote control for fi ne adjustment. 

•  In the REAL mode, the AUTO POSITION button 

doesn't function. When this button is pressed, the 
prohibition mark ( ) appears on the screen.

2.  Press the EXPAND button again to the exit the REAL 

mode.
•  The regular operation screen will appear.

EXPAND

REAL

Magnifi ed im-
age

Native resolution 
display