GE dect 28165xx3 ユーザーズマニュアル

Room Monitor

Room monitoring may be done from the base or the handset. Begin with unit you want to

monitor with (the microphone);
1. Make sure your phone is

OFF (not in TALK mode).

. Press the

MENU (SKR) to go to the main menu.

3. Use the 5 or 6 buttons to scroll to

ROOM MONITOR.

4. Press the

SELECT (SKL) to confirm.

5.  The list of registered units shows in the display.
6.  Use the 5 or 6buttons to select the unit you wish to monitor.
7.  Press the

SELECT (SKL) to confirm.

8. The first unit will then turn on the microphone and the second unit will turn on

earpiece to monitor sound.

NOTE: Handsets can be on cradle or off cradle for room monitoring to

work.
NOTE: While in room monitoring mode, the listening unit will emit an

alert tone approximately every 4 seconds if there is an incoming call.

You may press the LINE 1 or LINE 2 button to quit room monitor and

answer the call.
NOTE: Press the CANCEL (SKR) or the END/CANCEL button to exit room

monitor mode.

Call Transfer

During an external call, you may transfer the external call from base to handset(s)

or vice versa.

NOTE: To cancel the call transfer, you may press END/CANCEL button or

int button on base.

1. Press the

int button to put the line on hold. LX ON HOLD shows in the display, where X

is the Line number.

. Use the 5 or 6 buttons to select the desired handset or base. Press the

SELECT (SKL)

to confirm.

NOTE: If you only have one handset registered in the system, it is

paged automatically.

3. Press the

END/CANCEL button to transfer the call. TRANSFERRING FROM XXXX (where

XXXX is the name of the transferring unit) shows in the receiving unit's display.

4. Press the

OK (SKL) on the receiving unit to answer the call.