honda-power-equipment eu3000is ユーザーズマニュアル
16
AC CIRCUIT PROTECTOR
DC CIRCUIT PROTECTOR
DC RECEPTACLE
OFF
ON
PUSH
DC RECEPTACLE
DC CIRCUIT
PROTECTOR
PROTECTOR
120V 20A
120V 30A
AC CIRCUIT PROTECTOR
for Receptacle
for Receptacle
AC CIRCUIT PROTECTOR
for Receptacle
for Receptacle
AC CIRCUIT PROTECTOR
OFF
PUSH
ON
The AC circuit protectors will automatically switch OFF if there is a
short circuit or a significant overload of the generator at the 120V 20A
locking plug, or 120V 30A locking plug receptacle. If an AC circuit
protector switches OFF automatically, check that the appliance is
working properly and does not exceed the rated load capacity of the
circuit before resetting the AC circuit protector ON.
short circuit or a significant overload of the generator at the 120V 20A
locking plug, or 120V 30A locking plug receptacle. If an AC circuit
protector switches OFF automatically, check that the appliance is
working properly and does not exceed the rated load capacity of the
circuit before resetting the AC circuit protector ON.
The DC circuit protector automatically shuts off the DC battery
charging circuit when the DC charging circuit is overloaded, when
there is a problem with the battery, or when the connections between
the battery and the generator are improper.
charging circuit when the DC charging circuit is overloaded, when
there is a problem with the battery, or when the connections between
the battery and the generator are improper.
The DC receptacle should ONLY be used for charging 12-volt
automotive type batteries. The DC charging output is not regulated.
automotive type batteries. The DC charging output is not regulated.
07/01/11 13:52:57 31ZT7600_017