Hitachi VM-E220A ユーザーズマニュアル

When the date has been set, the camcorder will enter the automatic date recording mode automatically. 
1. Press the red button on the CAM/OFF/VIDEO switch as you slide it to CAM. 
2. Press the DATE/TITLE button to specify the date display you want to record. 

 

 AUTO and Date - Automatic Date Recording 

This option records the date automatically once a day at the beginning of recording for ten seconds 

 

Note: The camcorder records the same date when; 
- the cassette is replaced. 
- you select   AUTO and date display again. 
- the recording is less than 10 seconds long. 
Note: If the date changes while recording continues over 10 seconds, the new date is recorded for about 10 
seconds the next time you make a recording. 

 TITLE and Date - Automatic Title and Date Recording 

This option records the date and created title (see "Creating and Recording a Title" on page 43) automatically 
once a day at the beginning of recording for 10 seconds. 

 

Note: When   TITLE is displayed in the viewfinder, the title cannot be turned on or off using the remote 
control. 

Date - Date Recording 
The camcorder records the date with the picture all the time. 

 

No Display - No Date Recording 
The camcorder does not record the date. 

 

Date and Time - Date and Time Recording 
The camcorder records the date and time with the picture all the time.