Hitachi c28w40tn ユーザーズマニュアル

Connect the 431A plug of the modem

lead to a  socket of the dual outlet adaptor.

2

Insert the smaller  RJ11  plug into the rear

socket of your TV marked 

1

1

2

Connect the dual outlet adaptor to your

existing phone socket.

4

Connect your telephone to one of the

sockets of the adaptor.

3

4

3

wall socket 

phone outlet

dual outlet adaptor

rear of TV

existing

telephone

RJ11 plug

431A plug

In digital mode press and hold the MENU button

for 5 seconds until the INSTALL option in the 

MAIN MENU appears.

Press the cursor down button to select

INSTALL

Once highlighted, accept selection.

1

2

3

The modem hardware built into your Hitachi digital television, with the addition of external equipment

(not supplied) allows you to interact with your TV. In conjunction with the card slots at the rear of the TV this will

offer you future services such as home shopping, banking facilities, sports events and home premieres.To

access these facilities a modem lead and adaptor must be purchased.  This lead will have two plugs - a

RJ11 plug for connection to your TV, and a 431A plug which is connected to your existing

telephone line (with the help of an adaptor - see illustration below). 

Follow the instructions below on how to set up your modem  to obtain these future services.

1. Only use this equipment as a modem connected to your Public Switched Telephone

Network - any other usage will invalidate the UK BABT Approval of your TV’s modem.

2. Do not connect this modem to a shared service, or use it as an extension to a 

pay phone or connect it to one.

3. Each piece of connected equipment should remain operational providing the total sum of the REN

numbers is no greater than 4 (see external equipment connection - digital on page 10).