Hitachi c28w40tn ユーザーズマニュアル
connecting to the mains socket
aerial, satellite, and VCR installation
7
Super-VHS video equipment should be connected to the AV1 scart socket located at the
rear of your TV. A dedicated program number may be assigned to AV1, allowing you
easier access to view external equipment broadcasts. How to assign an AV signal to
dedicated program numbers is explained on pages 20 and 21.
satellite and VCR installation
Connect aerial (RF) ‘link lead’ to
satellite RF ‘in’.
Connect VCR ‘out’ to TV ‘in’
marked
2
4
AV1
AV2
RF OUT
SERIAL PORT
LINE
C.1
C.2
R
L
S
C
AUDIO LINE OUT
2 X 12W 8
Scart leads are an optional extra
*
Important - If you have not already done so, please read television safety on
page 4 before connecting your television and external equipment.
page 4 before connecting your television and external equipment.
insert plug...
...and switch on
5
*
A scart lead should be fitted between your TV and VCR to enhance your picture and sound
quality.
They are also rquired to record digital programs. Scart leads are essential if
you have a stereo TV and VCR and wish to obtain stereo sound from your equipment. These
leads can be purchased from your Hitachi dealer or any good High Street electrical
1
2
3
4
satellite decoder
Video Cassette Recorder
Connect aerial (RF) lead to digital ‘in’
marked
1
5
Connect satellite ‘out’ to
VCR RF ‘in’.
3
Note: The digital ‘link lead’
is the piece of equipment
with two ‘blocks’ near the
end.
is the piece of equipment
with two ‘blocks’ near the
end.