Havis-Shields cm001516 ユーザーズマニュアル

 

C-VS-1300-TBZ_INST_9-07 

3

 

 

 

 

Extend cut line on console sides.  

Carefully cut off back console 

section. (Jig saw, Air saw, Dremel 

or Air drill) 

Carefully reinstall front console 

section. 

(Reattach Traction Control Plug) 

Reattach shift lever “T” handle. 

 

Remove inboard rear seat nuts. 

(15mm) Place new rear hump 

brackets on seat studs under seat 

brackets. 

Attach bail bracket onto rear hump 

brackets with ¼ x ¾ bolts. 

Note: You may need to bend hump 

brackets slightly forward.  

Place duct block off plate in duct 

opening and screw down with #10 x 

½” sheet metal screw. 

Attach “L” mount brackets to new 

console lower side tracks with ¼ x 

½ bolts and washers.  

**Leave loose to aid in positioning. 

Place new console between seats 

and position “L” mount brackets 

onto OEM bracket.  Attach with 

1/4” x  3/4” bolts.

Position console housing as desired 

and tighten all mount hardware.  

**Check shift lever in rear position.